What does a tropical storm leave behind after the river drops?
The water leaves silt, debris and a line on the walls, and it saturates the framing and the ground. The damage is found by reading the surfaces and the wood, because the water may have traveled farther than the mud shows.
Once the river falls, the silt it carried settles on floors, along baseboards and inside the cracks of the foundation. The mud that dries on the surfaces is only part of the problem, since the moisture in the framing can keep the damage going for weeks.
The high-water line is a useful record. It shows how far the water rose in each room, and the crew measures it so the removal reaches the full height of the water and the drying covers every wall that was reached.
Can a building be cleaned while the river is still high?
Only in part. The crew can pump water that has already entered and move belongings out of harm's way, but it cannot finish drying while the water keeps coming in.
A river that stays high keeps pushing water through the ground and the drains, so the cleaning must be sequenced around its level. The crew removes what it can safely reach, and it waits for the water to fall before the framing is opened in the lowest rooms.
Homeowners should not return to a building that is still wet or surrounded by high water. A crew that visits during a flood warning will explain what can be done and when the rest of the work can start.
Should I save the furniture and the carpet?
Hard furniture that can be dried may be saved, and upholstered pieces and carpet that have been under river water usually cannot be cleaned to a safe level. The decision is made item by item after the water is removed.
Solid wood furniture with no damage to its joints can be cleaned and dried slowly in a dry room. Upholstery and cushions that held silt and sewage-contaminated water are usually removed, since the contamination cannot be fully washed out of the fabric.
Carpet and pad that were wet with river water are removed in nearly every case, because the silt and the moisture underneath cannot be dried through the fibers. The crew logs each item removed so the insurer and the homeowner have a record.
What affects the scope of a storm flood job?
The height of the water, how long it stood, the materials in the lower floor and the number of rooms reached all change the work. The scope is explained on site and agreed with the homeowner before the removal begins.
A storm that left a few inches of water on one floor is a smaller job than one that stood knee-high across the whole lower level. Each room adds removal, cleaning and drying, and the crawl space or the cellar below the floor adds more.
Access to the building is also a factor. A flooded house that must be pumped through a narrow stair or a small hatch takes more setup, and the crew plans the equipment placement before any pump is turned on.
How does the record protect the homeowner after a storm?
A dated record of the water height, the removal, the readings and the photographs gives the homeowner and the insurer what they need. It also shows which parts of the building were drying and when they reached their targets.
The record is the basis for the insurance claim and for the rebuilding plan. Without it, the homeowner has to reconstruct the damage from memory, which is slower and more likely to miss something.
The record also helps a future owner or buyer understand the history of the house. A written account of a flood, the work done and the readings is more useful than a verbal account, and it protects the owner from later questions.