Why does sewage come up through a drain in a storm?
When a combined sewer carries more flow than it can hold, the water rises in the lines and can push back up through the lowest drains in a house. Heavy rain is the usual trigger in older parts of the city.
Combined pipes carry household wastewater and storm runoff together. In a heavy storm the flow can exceed what the pipe can carry, and the level in the line rises. A house connected to a low point on that line can see sewage come up through a floor drain or a toilet before the street looks affected.
A backup can also come from a blockage in the lateral line that connects the house to the main, such as roots, grease or debris. In that case the backup can happen on a dry day, and the crew checks the line before assuming the storm is the cause.
Is a sewer backup covered by a homeowners policy?
Many standard policies exclude sewer backup unless a separate endorsement was added. The policy wording decides the answer, so the homeowner should check it and document the event as it happens.
Photograph the water, the drain and the damage before anything is removed, and keep a record of when the water was first noticed. Those notes help the insurer and the crew agree on what was damaged and when.
If a claim is denied or delayed, the Massachusetts Division of Insurance Consumer Services accepts consumer complaints about insurers. Start with the insurer, keep the written record of each step, and use the state route if the claim is not resolved.
What can be saved after sewage reaches a room?
Hard, nonporous surfaces can often be cleaned and disinfected. Porous materials that sewage reached, such as carpet, pad, cardboard and insulation, usually cannot be made safe again and are removed.
Concrete, metal, glazed tile and sealed hardwood can be washed with detergent and then disinfected. The disinfectant needs time to act and the surface needs to dry afterward, so the sequence matters more than the product name.
Wood framing can sometimes be saved if it is cleaned, disinfected and dried. The technician measures the framing at each stage, and any member that will not dry to readings is flagged for the rebuilding contractor to review.
What changes the size of a sewer cleanup?
The number of fixtures involved, the flooring, the stored goods and the layout of the cellar all change the work. The technician explains the scope on site and the homeowner approves it before the removal starts.
A backup from one drain in a finished room may need only that room cleaned and the drain cleared. A backup that spreads across a cellar with a laundry, a workshop and stored boxes requires more removal, more bagging and more disinfection.
The scope also depends on access and on the line. A blocked main that needs a machine may hold the cleanup until the line is cleared, and the crew keeps the work in the right order so the drain does not refill the cellar during the job.
What should a household do before a crew arrives?
Keep people and pets out of the affected area, turn off nothing that is wet, and avoid flushing or running water into the house until the line is checked. Open a window only if it is safe to do so.
Do not use the drain that backed up, and do not run water in the sinks or the washing machine, because each use can push more sewage into the room. Keep a note of the time the backup started and whether it coincided with the rain.
Do not wade into sewage without boots, gloves and eye protection. If the cellar holds an electrical panel in standing water, stay out and call the utility. Call Springfield Water Damage Restoration at (833) 490-5225 and describe where the water came up.